Mobile Detailing Pricing: How to Price a Full Detail Per Hour

You have three packages on your price sheet, an express wash, a full interior and exterior detail and a fleet rate, and you set them by looking at what other detailers in town charge. The calendar is full, but at the end of the month the money does not match the hours. The reason is almost always the same: mobile detailing pricing that is set per vehicle but never checked per hour, and never counts the drive.

This guide compares three typical packages on net dollars per hour after supplies, fuel and travel time, shows which one is quietly losing, and gives you a formula to reset each price to a target.

All prices, times and costs below are example assumptions. Use your own timings and local prices.

The three packages (example)

Package Price On-site hours
Express wash & wax $75 1.5
Full interior + exterior detail $175 3.5
Fleet wash (per vehicle, 6 vehicles at one site) $28 0.5 each

On the surface, these look similar: $75 ÷ 1.5 = $50 an hour, $175 ÷ 3.5 = $50 an hour, $28 ÷ 0.5 = $56 an hour. That is the number most detailers stop at. It is the wrong number.

Add the costs nobody prices in

Two more things belong to every appointment:

A fleet job is one appointment with six vehicles, so it pays for one trip, not six.

Side-by-side: net dollars per hour

Net per hour = (price − supplies − fuel) ÷ (on-site hours + drive hours)

Package Revenue Supplies + fuel Net revenue Total hours Net per hour
Express wash & wax $75 $6 + $8 = $14 $61 1.5 + 0.83 = 2.33 $26.18
Full detail $175 $18 + $8 = $26 $149 3.5 + 0.83 = 4.33 $34.41
Fleet (6 units) $168 $18 + $8 = $26 $142 3.0 + 0.83 = 3.83 $37.08

The picture changes completely. The express wash, which looked like a $50 an hour job, nets about $26 an hour because the drive eats a third of the appointment. The fleet contract, the cheapest per vehicle, is the best earner per hour because six cars share one drive and one setup.

Set prices from a target instead

Turn the formula around to find the price each package needs:

Price = target net per hour × (on-site hours + drive hours) + supplies + fuel

With a target of $45 net per hour:

Package Calculation Price needed
Express wash & wax $45 × 2.33 + $14 $119
Full detail $45 × 4.33 + $26 $221
Fleet unit (6 per visit) ($45 × 3.83 + $26) ÷ 6 $33 per vehicle

You do not have to jump straight to these numbers, but now you know the gap. A few ways to close it without simply raising every price:

  1. Route-stack express washes. Two express washes in the same street share one drive: ($150 − $12 − $8) ÷ (3 + 0.83) = $33.94 net an hour, up from $26.18. A “neighbor discount” that brings a second car on the same visit is often worth more than it costs.
  2. Set a travel radius. Inside 10 miles, no trip charge; outside it, a flat fee. The far-away express wash is the one that loses most.
  3. Sell add-ons on site. An interior wipe-down or headlight restoration added to an express wash uses the setup you already paid for.
  4. Make express a minimum, not a loss leader. If the express package must stay cheap for marketing, make it available only on days you are already in that area.

Check your real times

All of this depends on honest hours. Time your next five of each package from arrival to driving away, not from the first spray to the last wipe. Most detailers find setup and pack-up add 15 to 20 minutes they never priced. Put the real average into your price sheet as the estimated time, and the per-hour check stays accurate.

Copy-ready package calculator

Columns: Package | Price | On-site hrs | Vehicles per visit | Supplies per vehicle | Drive hrs | Fuel per trip

Change the target or a drive time and every package reprices.

Where this lives in a full business tracker

Detailing rarely runs on its own: many operators pair it with pressure washing, or run a fleet contract alongside house washes. The Pressure Washing & Mobile Detailing Business Tracker keeps flat-priced detail packages and square-foot exterior services on the same Service Menu, each with an estimated time. The Quote Builder returns the effective rate per labor hour on every quote, and the Mileage Log records each trip so drive time and the mileage deduction are not lost. For how the whole system fits together, start with the pressure washing business spreadsheet guide.

General information only, not business or tax advice. All figures are illustrative assumptions.

Frequently Asked Questions

How do I price mobile detailing services per hour?

Work backwards from the net hourly rate you want. Add the on-site hours and the round-trip drive time for the appointment, multiply by your target net hourly rate, then add supplies and fuel for that visit. For example, a full detail taking 3.5 hours plus 50 minutes of driving, at a $45 target with $26 of supplies and fuel, comes to about $221.

Why does an express wash make less per hour than it looks?

Because the drive to and from the customer is unpaid time and it costs the same whether the job is 90 minutes or four hours. A $75 express wash that takes 1.5 hours looks like $50 an hour, but after $14 of supplies and fuel and 50 minutes of driving it nets about $26 an hour in the example in this guide.

Is fleet washing more profitable than individual details?

Per vehicle it pays less, but it usually earns more per hour because several vehicles share one trip and one setup. In the worked example here, six fleet units at $28 each net about $37 an hour against $34 for a full detail and $26 for a standalone express wash.

Should mobile detailers charge a travel fee?

Many do, either as a flat trip charge outside a set radius or by building average drive time into package prices. Whichever you choose, include the drive time in your per-hour check, because it is real working time even though the customer never sees it.

Know Your Real Rate Per Hour Before You Send the Quote

The Pressure Washing & Mobile Detailing Business Tracker — 9 linked tabs for an exterior cleaning or mobile detailing business: Settings for your hourly labor rate, target markup, default price per square foot, trip charge, mileage rate and tax set-aside; a Service Menu priced per square foot, per linear foot or flat, each with an estimated time; a Quote Builder that returns the quote total and your effective rate per labor hour; a Job Tracker from Quoted to Paid with balances owed; a Client List that calculates each client's next service date and flags who is due; Income & Expenses by category; an Equipment Log with service-due flags by run hours; a Mileage Log; and a Dashboard with revenue, expenses, net profit, margin, jobs completed, outstanding balances, average job value and tax set-aside. Sample season pre-filled. Works in Excel and Google Sheets.

View on Etsy — $16.99